在环氧地坪漆工程中,会出现各类的地坪缺陷问题,那么应该如何应对,现在就来对环氧地坪漆出现表面粗糙来简单了解下原因以及如何解决:1、因为施工环境不干净,有较多的灰尘,灰尘黏在涂膜上就会出现粗糙;
In the epoxy floor paint project, there will be a variety of floor defects, then how to deal with it, now to epoxy floor paint surface roughness to understand the reasons and how to solve: 1, because the construction environment is not clean, there is more dust, dust will appear on the film roughness;
2、调配好的环氧地坪漆工程材料没有经过过滤就直接使用了,使杂质混入里面,当涂膜干燥之后就会在环氧地坪漆工程上显示出来;
2. The prepared epoxy floor paint engineering materials are directly used without filtration, so that impurities are mixed into the interior, when the film is dry, it will be displayed in the epoxy floor paint project;
3、环氧地坪漆工程漆已经开始固化,仍然继续施工,因为环氧地坪漆工程漆都是双组分的,加入固化剂之后就会产生化学反应,然后固化成膜,如果已经开始固化,仍会施工完成,那就会导致粗糙;
3. The epoxy floor paint project paint has begun to solidify, still continue to work, because the epoxy floor paint project paint are two-component, after adding curing agent will produce chemical reaction, and then solidified into a film, if it has begun to solidify, will still be completed, it will lead to roughness;
4、施工现场的温度太高,使得稀释剂挥发速度快,环氧地坪漆工程还没有流平就已经固化。
4. The high temperature in the construction site makes the diluent evaporate quickly, and the epoxy floor paint has solidified before leveling.
车库地坪
Garage floor
解决环氧地坪漆工程漆出现粗糙表面的方法:
To solve the rough surface of epoxy floor paint,
1、在施工环氧地坪漆工程之前一定要将基面及现场清扫干净,将环氧地坪漆工程材料用过滤网过滤之后再施工。
1. Before the construction of epoxy floor paint project, the base and site must be cleaned, the epoxy floor paint project materials are filtered with a filter before the construction.
2、施工前要根据施工时间计算材料的用量,再严格按照涂料配比进行调配。
2, before construction, the amount of materials should be calculated according to the construction time, and then strictly allocated according to the coating ratio.
3、处理好下层,从底层开始就要按施工要求做好,中层要杜绝粗糙现象,面层施工前一定要把中层清理干净,确认无灰尘后再施工,这样就可以解决环氧地坪漆工程该类的粗糙现象了。
3. Handle the lower layer well, from the bottom to do a good job in accordance with the construction requirements, the middle layer to prevent rough phenomenon, the surface layer must be cleaned up before the construction, to confirm that there is no dust after construction, so that can solve the epoxy floor paint project of this kind of rough phenomenon. 本站网址:http://www.wuxispeed.com
|