环氧砂浆环氧地坪是指环氧树脂涂料添加精细石英沙经过人工调配而成的，环氧地坪用于建筑物体，工业地面。强度高、耐磨性损、美观耐用，具有无接缝、质地坚实、耐药品性佳、防腐、防尘、保养方便、维护费用低廉等优点；还可根据需求添加防静电、导静电、防滑等特性。

Epoxy mortar floor is manually prepared by adding fine quartz sand to epoxy resin coatings. Epoxy floor is used in buildings and industrial floors. High strength, wear resistance, beautiful and durable, with seamless, solid texture, good resistance, anti-corrosion, dust-proof, easy maintenance, low maintenance costs and other advantages; can also be added according to demand anti-static, static electricity, anti-skid and other characteristics. 

环氧砂浆环氧地坪基面要求

Requirements for Epoxy Mortar Floor Base Surface

1、水泥基面牢固、结实、不起壳，应杜绝砂浆起壳现象，混凝土层与砂浆找平层最好一起浇筑。若先浇筑混凝土层，则要求砂浆层的厚度不低于40mm，对叉车道的要求则更厚。有关坡度应符合设计要求，允许偏差值为坡度的2%，并且不大于30mm。

1. Cement base surface is firm, firm and can not afford shelling. Mortar shelling should be eliminated. Concrete layer and mortar leveling layer should be poured together. If the concrete layer is poured first, the thickness of the mortar layer should not be less than 40 mm, and the requirement of the forklift lane should be thicker. The slope should meet the design requirements. The allowable deviation value is 2% of the slope, and it is not more than 30 mm.

2、要求表面不起砂，硬度高，没有水泥粉化现象。新浇筑的水泥砂浆层要充分保养。水泥基面平坦，无凹凸不平、蜂窝麻面、水泥疙瘩，其他涂料、乳胶漆、泡泡糖等残渣。

2. No sand on the surface, high hardness and no cement powdering are required. The newly poured cement mortar layer should be fully maintained. The cement base surface is flat, and there are no bumps, honeycomb linen surface, cement knots, other coatings, latex paint, foam sugar and other residues.

环氧砂浆地坪应用领域

Application Field of Epoxy Mortar Floor

建筑材料当中，环氧地坪具有广泛的应用范围，应用于各个领域，具体归类为以下六个领域：

Among building materials, epoxy flooring has a wide range of applications in various fields, specifically classified as the following six areas:

①环氧地坪应用在涂料工业：环氧地坪工业中需用量最大，较广泛使用的有水性涂料、粉末涂料和高固分涂料。可广泛用于管道容器、汽车、船舶、航天、电子、玩具、工艺品等行业。

(1) The application of epoxy flooring in coating industry: the epoxy flooring industry needs the largest amount of water-borne coatings, powder coatings and high solid coatings, which are widely used. It can be widely used in pipeline containers, automobiles, ships, aerospace, electronics, toys, handicrafts and other industries.

②环氧地坪应用在电子电器工业：环氧树脂胶可用于电气绝缘材料，例如整流器、变压器的密封灌注;电子元器件的密封保护;机电产品的绝缘处理与粘接;蓄电池的密封粘接;电容器、电阻、电感器的表面披覆。

(2) Application of epoxy floor in electronic and electrical industry: epoxy resin adhesive can be used for sealing and filling of electrical insulation materials, such as rectifiers and transformers; sealing protection of electronic components; insulation treatment and bonding of mechanical and electrical products; sealing and bonding of storage batteries; surface coating of capacitors, resistors and inductors.

③环氧地坪应用在五金饰品，工艺品、体育用品品行业：可用于标牌、饰品、商标、五金、球拍、钓具、运动用品、工艺品等产品上。

(3) Epoxy flooring is used in hardware jewelry, handicraft and sporting goods industry: it can be used in label, jewelry, trademark, hardware, racket, fishing gear, sporting goods, handicraft and other products.

④环氧地坪应用在光电行业：可用于发光二极管(LED)、数码管、像素管、电子显示屏、LED灯饰等产品的封装、灌注和粘接。

(4) Epoxy floor is used in photoelectric industry: it can be used for packaging, filling and bonding of light emitting diode (LED), digital tube, pixel tube, electronic display screen, LED lighting and other products.

环氧砂浆地坪施工工艺

Construction Technology of Epoxy Mortar Floor

1、基面打磨: 使用专业的研磨机对素地进行打磨粗糙处理，增加与环氧地坪漆的粘接力。

1. Base surface polishing: Use professional grinder to roughen the plain ground to increase the adhesion with epoxy floor paint.

2、表面清洁及修补: 地表若有油污则作专业清洗或使用专业机械设备进行表面处理，如素地局部潮湿则用瓦斯枪进行烘干处理，若素地有裂缝、凹洞等则必须先用环氧树脂砂浆修补平整。

2. Surface cleaning and repairing: If there is oil contamination on the surface, it should be cleaned or treated with professional mechanical equipment. If there is local humidity on the ground, it should be dried with gas gun. If there are cracks and holes on the ground, it must be repaired with epoxy mortar first.

3、环氧底漆：将环氧树脂渗透底漆A组分与B组分按一定比例调配均匀滚涂做底层，目的在于封闭地坪表面,底漆渗透地面,使环氧地坪漆与地面紧密一体。(涂刷基面时,要求均匀、无遗漏。)

3. Epoxy primer: Epoxy penetrating primer A and B are evenly rolled to make the bottom layer in a certain proportion. The purpose is to seal the floor surface and penetrate the floor with the primer, so that the epoxy floor paint and the ground are closely integrated. When painting the base surface, it is required to be uniform and without omission. )

4、环氧砂浆层:将环氧树脂中涂地坪漆A组分与B组分按一定比例调合搅匀,加入80-120目石英砂调成环氧石英砂浆，刮涂环氧砂浆中间层。目的在于增加地面的耐重压、耐冲击性。

4. Epoxy mortar layer: mix and mix component A and component B of epoxy resin floor paint in a certain proportion, add 80-120 mesh quartz sand into epoxy quartz mortar, scrape and coat the middle layer of epoxy mortar. The purpose is to increase the ground's resistance to pressure and impact.

5、环氧腻子层:将A组分和B组分按一定比例调合搅匀，加入300目石英粉调成环氧树脂腻子，全面批覆1遍（施工限定时间30分钟左右，目的在于补平砂孔，进一步修补、找平地面,为面漆施工做准备。

5. Epoxy putty layer: mix and mix component A and component B according to a certain proportion, add 300 mesh quartz powder to make epoxy putty, and complete batch once (construction time is limited to about 30 minutes, the purpose is to mend sand holes, further repair and leveling the ground, prepare for topcoat construction.

6、环氧面涂:待腻子层固化后,封闭施工区域,不允许闲杂人员进入,重新清理地面,仔细检查,铲除表面颗粒,修补地面缺陷,用吸尘器吸尘、清洁地面进行面涂施工；将环氧树脂面漆A组分和B组分调合搅匀，用专业滚筒均匀涂刷2遍（间隔约8小时）。

6. Epoxy topcoat: After the putty layer solidifies, the construction area is closed, no idle workers are allowed to enter, the ground is cleaned again, the surface particles are carefully checked, the surface defects are repaired, the surface is coated with vacuum cleaner, and the surface is cleaned. Component A and B of epoxy topcoat are blended and stirred up, and the surface is evenly painted twice with professional drum (about 8 hours interval).