浠�涔堟槸鐜�姘у湴鍧�娴佺棔?鏈夋椂鍊欐垜浠�鍙�鑳藉湪涓�浜涙�ｅ湪鏂藉伐涓�鐨�鐜�姘у湴鍧�婕�涓婏紝鐪嬪埌涓�閬撻亾鍍忔唱鐥曠殑鐥曡抗锛岃繖绉嶇棔杩硅��绉颁负鈥滄祦鐥曗�濓紝鏄�鍦�鐜�姘у湴鍧�婕�鍦ㄥ柗娑傝繃绋嬩腑鍙楀悇绉嶅洜绱犲奖鍝嶉�犳垚鐨勬紗鑶滃悜涓嬫祦娣岃�屽舰鎴愮殑銆傞�犳垚杩欑�嶇棔杩圭殑鍘熷洜鏈夊摢浜涘憿锛�1銆�鐜�姘у湴鍧�婕嗘柦宸ョ殑鐜�澧冨樊(鐜�姘у湴鍧�婕嗘柦宸ョ幆澧冩俯娓¤繃楂樻垨杩囦綆;鐜�澧冧腑鐨勬憾鍓傝捀姹藉惈閲忚繃楂�;鏂藉伐鐜板満绌烘皵涓嶆祦閫�) 銆�

What is epoxy floor paint flow marks? Sometimes we may see a tear-like trace on some epoxy floor paints under construction. This trace is called "flow marks", which is formed by the downward flow of paint film caused by various factors during the spraying process of epoxy floor paints. What are the causes of this trace? 1. The construction environment of epoxy floor paint is poor (the temperature of the construction environment is too high or too low; the content of solvent vapor in the environment is too high; the air in the construction site is not circulating).

2銆佹柦宸ユ椂鐢变簬鍠锋秱鎿嶄綔涓嶅綋瀵艰嚧婕嗚啘鍑虹幇娴佺棔鐜拌薄锛屽柗鏋�涓庡湴闈㈤潬寰楀お杩戞垨鑰呯Щ鍔ㄥ柗鏋�鐨勯�熷害澶�鎱㈢瓑绛夐兘浼氶�犳垚鏂藉伐鍘氬害瓒呮爣銆傚�逛簬鍠锋灙鐨勮�惧畾瑕侀�傚綋锛屽柗鏋�涔熶細褰卞搷鐜�姘�鑰愮（鍦板潽鐨勮川閲忥紝濡傛灉鍠锋灙鍠锋秱鐨勫箙搴﹀皬灏卞簲璇ュ�瑰簲鍑忓皬鍑烘紗閲忋�傛柦宸ヤ汉鍛樼殑鎶�鏈�涔熸槸閫犳垚婕嗚啘鍑虹幇娴佺棔鐨勫洜绱犱箣涓�銆�鐜�姘у湴鍧�婕嗗湪鍠锋秱杩囩▼涓�涓�瀹氳�佹寜鐓�鐜�姘у湴鍧�婕嗘柦宸ュ伐鑹烘妸鎺уソ婕嗚啘鍘氳杽锛屾瘮杈冨帤鐨勬秱鑶滄瘮杈冮毦骞诧紝灏卞�规槗鍚戜笅娴佹穼褰㈡垚娴佺棔銆�

2. Due to improper spraying operation, the paint film appears flow marks. Too close the spraying gun to the ground or too slow moving speed of the spraying gun will cause the construction thickness to exceed the standard. For the spray gun setting to be appropriate, the spray gun will also affect the quality of the epoxy wear-resistant floor, if the spray gun spraying range is small, it should correspondingly reduce the amount of paint. The technology of the builder is also one of the factors that cause the flow marks of the paint film. In the spraying process of epoxy floor paint, we must control the thickness of the paint film according to the construction technology of epoxy floor paint. Thicker film is difficult to dry, so it is easy to flow downward to form flow marks.

3銆�鐜�姘у湴鍧�婕嗕笌绋�閲婂墏涓嶉厤濂楋紝鎴栨槸杩愮敤杩囧�氶槻娼�鍓傦紝娑傛枡绮樻浮杩囦綆閮戒細褰㈡垚娴佺棔鐜拌薄銆�

3. If the epoxy floor paint is not compatible with the diluent, or if too much moisture-proof agent is used, too low adhesion of the paint will result in flow marks.

娴佺棔鐨勯槻娌绘柟娉曪細

The prevention and treatment methods of flow marks are as follows:

1銆佹紗鍒疯樃婕嗕笉瑕佽繃閲�;

1. Don't dip too much paint in the brush.

2銆佹坊鍔犻槻娴佹寕鍓�;

2. Adding anti-flow hanging agent;

3銆侀�傚綋璋冩暣绮樺害;

3. Adjust the viscosity properly.

4銆佹哀鐜�姘у湴鍧�婕嗚繘琛屾墦纾ㄣ��