在进行无锡环氧地坪施工之前,必定要采纳必定办法将这三点影响要素消除或下降,防止在施工时由于这些要素而构成施工质量欠安的现象,不然便是白做工,既糟蹋施工本钱又耽搁时刻。要想确保以及行进环氧地坪施工质量,那么首要要做的便是依照正确的施工进程进行施工,一同还要将能够影响其施工质量的要素下降到最小或消除,然后才干更大化的确保该环氧地坪的施工质量。那么话说回来,能够影响其施工质量的要素又有哪些呢?
Before the construction of epoxy floor, we must adopt certain methods to eliminate or decrease these three factors, so as to prevent the unsafe construction quality caused by these factors during construction. Otherwise, the construction cost will be wasted and the construction time will be delayed. In order to ensure the construction quality of epoxy floor, the first thing to do is to carry out construction according to the correct construction process. At the same time, the factors that can affect the construction quality should be reduced to the minimum or eliminated, and then the construction quality of the epoxy floor can be guaranteed more greatly. So what are the factors that can affect the quality of construction?
1、外界环境要素影响:
1. The influence of external environmental factors:
环氧地坪漆对施工环境的温度条件要求较高,不能在过低或过高的温度下施工。
Epoxy floor paint requires high temperature conditions of construction environment, and can not be constructed at too low or too high temperature.
2、温度对环氧地坪施工的影响:
2. The influence of temperature on epoxy floor construction:
环氧地坪中,双组分的涂料在温度低于5度的环境中很难进行固化反响,或许反响十分慢,然后导致成膜的时刻大幅延伸,或许导致无法成膜,无法固化。
In epoxy flooring, it is difficult for two-component coatings to solidify at temperatures below 5 degrees. Perhaps the reaction is very slow, and then the time of film formation extends greatly. Perhaps it can not be solidified.
3、湿度对环氧环氧地坪施工的影响:
3. The influence of humidity on epoxy floor construction:
依据环氧环氧地坪施工要求规则,当空气相对湿度高于85%时,是不能进行无锡环氧地坪施工的,由于简略呈现泛白、裂纹等弊端。
According to the construction requirements of epoxy flooring, when the relative humidity of air is higher than 85%, the construction of epoxy flooring can not be carried out, because of the shortcomings of whiteness and cracks. 本站网址:http://www.wuxispeed.com
|