环氧地坪使用助剂那就是很常见的问题,其中助剂就相当于催化剂,使用得当那就会产生难以估计的作用,一旦就是使用不好的话,那就会是相反作用了:1 )分散剂环氧地坪漆,填充内容,教学量是比较高的,分散的时候,分散,效率低,且易产生浮色,模糊现象,应加入改善润湿分散剂的常用方法。乙醇酸酯分散剂理想的润湿性,较低的教育,分散,防浮色,防模糊效果,同时也提高了涂膜光泽,促进流平性防止涂料沉淀效果。
The use of additives in epoxy flooring is a very common problem, in which the additives are equivalent to catalysts. If used properly, it will have an inestimable effect. Once used poorly, it will have the opposite effect: 1) dispersant epoxy flooring paint, filling content, teaching volume is relatively high, when dispersed, the effect will be different. Dispersion, low efficiency, floatation and blurring are easy to occur. Common methods to improve wetting dispersant should be added. Glycolate dispersant has ideal wettability, low education, dispersion, anti-float and anti-blur effect. It also improves the gloss of the coating, promotes leveling and prevents the precipitation effect of the coating. 2 )耐磨环氧自流平地坪涂料剂,由于少无溶剂环氧地坪漆耐磨的溶剂含量和不含挥发性溶剂,油漆教高的表面张力,穷人的建设后润湿基材,练级差,易发生剥离涂层,刷痕,波纹,火山口等表面针子状态的缺陷。因此,受流平剂添加,减少涂料的表面张力,延长时间的流动,改善流平性能。
2) Wear-resistant epoxy self-leveling floor paint, due to less solvent-free epoxy floor paint wear-resistant solvent content and no volatile solvents, paint teaches high surface tension, poor construction wetting base material, poor training, easy to peel coating, brush marks, ripples, craters and other surface needle defects. Therefore, the addition of leveling agent reduces the surface tension of the coating, prolongs the flow time and improves the leveling performance.
3)消泡剂含有多种耐磨材料用的表面活性,容易起泡环氧地板涂料;水泥砂浆基材,有许多毛孔,毛孔会被空气中留出的薄膜涂料的更换;建筑用机械搅拌和刮板在表面涂层使大量空气进入膜;而他们的油漆粘度,稳定的气泡在影片中,不易排出,这些因素使涂料应加入加速气体放电消泡剂,降低针的儿子,鱼眼等缺陷。
3) Defoamers contain a variety of surface activity for wear-resistant materials and are easy to foam epoxy floor coatings; cement mortar substrates have many pores, which will be replaced by thin film coatings left in the air; mechanical mixing and scraper coating for construction cause a large amount of air to enter the film; and their paint viscosity, stable bubbles in the shadow. In the film, it is not easy to discharge, these factors make the coating should be added accelerated gas discharge defoamer, reduce needle son, fish eye and other defects. 本站网址:http://www.wuxispeed.com
|