什么是环氧地坪?相信在互联网普及的情况下,没有人会不知道它是什么,这里也就不再详细地介绍了。而环氧地坪漆工程改造是因为无锡环氧地坪表面大面积的遭到破坏所以要施工,我学到了环氧地坪施工的步骤是怎么样,下面,就和我一起来看看吧!
What is epoxy floor? It is believed that in the case of the popularity of the Internet, no one will know what it is, and it will not be described in detail here. But the epoxy floor paint project transformation is because the surface of the floor was destroyed in a large area, so to construct, I learned how the steps of the epoxy floor construction, below, let me see it together!
1.清洁地面:将环氧地坪的表面处理干净,有利于施工操作,另外,可以清楚地看到地面受损的情况,分析问题关键。
1. Clean the ground: Clean the surface of epoxy floor, which is conducive to construction operation. In addition, we can clearly see the damage of the ground, and analyze the key issues.
2.研磨破损环氧漆层:利用环氧地坪研磨机将环氧漆层全部除掉,使基层平面高度一样,以便利与环氧地坪漆工程改造,并检查一遍有没有局部修复漏洞。
2. Grinding damaged epoxy paint layer: Use floor grinder to remove all the epoxy paint layer, so that the base level is the same, so as to facilitate the engineering transformation of epoxy floor paint, and check whether there are local repair loopholes.
3.磨压渗透剂:使用渗透剂,将混凝土内部空隙全部封住,提高混凝土的密实性。
3. Grinding penetrating agent: Using penetrating agent, all the internal voids of concrete are sealed to improve the compactness of concrete.
4.封堵毛细孔结晶:进一步提高混凝土的强硬度,增强环氧地坪漆工程改造的耐磨性能,从而能够抵抗外界的压力。
4. Closure of capillary crystallization: further improve the strength and hardness of concrete, enhance the wear resistance of epoxy floor paint engineering renovation, so as to resist external pressure.
5.磨压硬化剂:将渗透剂与硬化剂充分的混合,保证两者的浸泡时间,将混凝土硬度提高到9级,能够承受机械的重力。
5. Grinding and hardening agent: mix penetrating agent and hardening agent sufficiently to ensure the soaking time of both, increase the hardness of concrete to grade 9, and can withstand mechanical gravity.
6.混凝土硅化改性:这是为了让无锡环氧地坪漆工程改造后,具备防潮、防油、防水等功能。
6. Silicification modification of concrete: This is to enable the epoxy floor paint project after transformation, with moisture-proof, oil-proof, waterproof and other functions.
7.抛光晶面剂: 环氧地坪漆工程改造施工完成后,地面要进行抛光,让地面看起来光亮、自然,同时,将地面清洁干净。
7. Polishing Crystalline Surface Agent: After the reconstruction of epoxy floor paint project, the ground should be polished to make the ground look bright and natural, and at the same time, the ground should be clean. վַhttp://www.wuxispeed.com
|