在环氧地坪漆施工过程中老生常谈，但对于非专业团队，他们往往很难形成完整的概念，也就无从在每一次施工过程中，在每一个无锡环氧地坪施工步骤中，都能很好的完成其施工质量，因此也常常带来项目的许多不良现象，最后归责于材料生产厂家.其实是因为经常会遇到客户投诉的情况，他们会因为材料在施工的过程中出现了问题之后，就定性材料有问题，而其中，很多问题是新手施工或者“野鸡”团队施工不良引起的，最后把责任都归结到材料质量上面来。

In the construction process of epoxy floor paint, there is a cliche, but for non-professional teams, it is often difficult for them to form a complete concept, and it is impossible for them to complete the construction quality well in each construction process, in each construction step, so it often brings many bad phenomena of the project, and finally blame the material. Material manufacturers. In fact, they often meet customer complaints. They will have problems with qualitative materials because of the problems in the construction process. Many of these problems are caused by the poor construction of novice construction or "pheasant" team. Finally, the responsibility is attributed to the quality of materials. 。 因施工不当引起的问题其实千奇百怪，其中最为常见的就是长时间没办法干燥固化的问题，简单的说，任何厂家，不管是做高级别环氧漆的，还是做低端漆的，是绝对不允许材料有固化不了的情况的，要不然货都卖不动了还咋生存？所以说，要避免许多不必要的损失，施工时找专业的团队是非常重要的事情！下面我们不说野鸡团队有多差，我们说说专业团队都是怎么操作环氧地坪漆施工的吧！

In fact, the problems caused by improper construction are very strange. The most common problem is that the drying and solidification can not be done for a long time. Simply speaking, any manufacturer, whether it is making high-grade epoxy paint or low-end paint, absolutely does not allow materials to be solidified, otherwise the goods will not be sold. Existence? So, in order to avoid many unnecessary losses, it is very important to find a professional team during construction. Now let's not talk about how bad the pheasant team is. Let's talk about how the professional team operates the floor paint construction.

一、施工前必须全面检测施工现场

1. The construction site must be fully inspected before construction.

检测现场的目的在于验证施工场所是否达到了环氧地坪漆施工的条件，还有就是查找存在的隐患问题，通常包括但不限于以下方面：

The purpose of the inspection site is to verify whether the construction site has met the requirements of floor paint construction, and to find out the hidden problems, which usually include but are not limited to the following aspects:

1、混凝土基是否达到预期强度；

1. Whether the concrete foundation achieves the expected strength or not;

2、混凝土表面含水量是否低于8%；

2. Whether the surface water content of concrete is less than 8%.

3、基面是否有松散脱基情况；

3. Whether the base surface is loosely decomposed or not;

4、是否存在渗水漏水情况；

4. Whether there is leakage or not;

5、环境是否达到环氧漆固化的基本条件。

5. Whether the environment meets the basic conditions of curing epoxy paint.

二、施工前基面的初步处理

Preliminary treatment of foundation before construction

在以上检测达标之后，开始施工前必须对基面进行全面的清理，目的是避免表面不良对环氧漆膜附着引起风险，通常应该注意几种情况：

After the above tests have met the standards, the base surface must be cleaned up before construction. The purpose is to avoid the risk caused by poor surface on the adhesion of epoxy paint film. Usually, several situations should be paid attention to.

1、油污，必须用去油剂进行清洗；

1. Oil contamination must be cleaned with degreasing agent.

2、酸碱残留，针对性选择去酸碱清洁剂清洗；

2. Remains of acid and alkali should be cleaned with acid and alkali removal detergent.

3、附着物，如香口胶、胶纸或粘性固体等粘着物；

3. Adhesives, such as gum, adhesive paper or sticky solids;

4、水泥剥离层，混凝土的起砂层等。

4. Cement peeling layer, concrete sand layer, etc.

三、正确地调配环氧涂料

3. Correctly dispensing epoxy coatings

这一步骤是“野鸡”们最容易出问题的环节，因为他们不懂得正确调配材料的重要性和具体方法，而任自以为是的操作，往往带来了后面许多许多的问题：

This step is the most problematic step for "pheasants" because they do not understand the importance and specific methods of the correct allocation of materials, and the self-righteous operation often brings many problems behind them:

1、正确的调配比例，不同厂家调配比例是不同的，不同品种的材料，比例也不尽相同，因此在调配之前，必须先参考厂家提供的调配比例，而不是任经验进行；

1. Correct allocation proportion, different manufacturers allocation proportion is different, different varieties of materials, the proportion is also different, so before allocation, we must first refer to the allocation proportion provided by manufacturers, rather than any experience.

2、不添加多余助剂，溶剂型环氧地坪漆需要多种助剂，但是新型的环保无溶剂型环氧漆不需要，也不可以添加多余助剂，添加的后果就是无法固化；

2. Solvent-based floor paint needs many kinds of additives without adding extra additives, but new environmentally friendly solvent-free epoxy paint does not need or can not add extra additives, and the result is that it can not be cured.

3、充分的调合操作，专业油性漆是由甲组份与乙组分构成的，使用时将两种溶液混合在一起，并进行充分的搅拌，使其完全均匀混合才能达到良好的固化效果，如果混合不均，将引起施工后长时间无法固化的情况，这与涂料的品质没有关系，完全是操作问题，建议使用电动搅拌器进行3分钟以上的搅拌。

3. Full blending operation. Professional paint is composed of component A and component B. When used, the two solutions are mixed together and stirred sufficiently to achieve good curing effect. If the mixing is not uniform, it will cause a long time after construction, which is not curable with the paint. The quality has nothing to do with it. It is totally an operation problem. It is recommended to use electric agitator to mix for more than 3 minutes.

四、正确地使用环氧涂料

IV. Correct Use of Epoxy Coatings

环氧涂料调配完成之后，在施工的时候需要根据材料的特性进行正确的操作，如果操作不当，也会引发许多问题：

After the epoxy coating is prepared, the proper operation should be carried out according to the characteristics of the material during the construction. If the operation is not proper, many problems will arise.

1、凝胶完成之前用完材料，涂料调配之后开始进入固化反应状态，在调料之后的1小时内用完材料，可以保证材料有足够良好的流动性，随着时间延长，漆液将越来越粘，直到固化，所以，调配材料应该以用多少调多少的原则进行，不可提前调配；

1. Before the gel is finished, the material is used up, and the paint is started to enter the curing reaction state after the dispensing. After 1 hours of dressing, the material can be guaranteed to have enough fluidity. As time goes on, the paint will stick more and more until it is solidified, so the blending material should be adjusted according to the amount of adjustment. Yes, it can't be deployed in advance.

2、正确施工材料，薄涂型漆种以辊涂为主，漆膜不可过厚，过厚容易产生固化失均性的褶皱；自流平型漆种以批刮为主，漆膜不可过薄，过薄会产生大量的气泡，导致最后成膜之后有许多气孔、起泡或环形丘的情况；

2. Correct construction materials, thin-coated paints are mainly roll-coated, the film should not be too thick, and it is easy to produce curing uneven folds; self-leveling paints are mainly batch scraping, the film should not be too thin, too thin will produce a large number of bubbles, resulting in a lot of pores, bubbles or annular hills after the final film formation;

3、正确的施工间隔，每道漆需经过足够的表面固化时间间隔，待漆膜完全干燥之后才能进行下一道漆的施工，未干燥即进行抢施，最容易引起漆膜起皱和脱皮风险。

3. Correct construction interval, each paint needs enough surface curing time interval, until the film is completely dried before the next paint construction, not drying is rushed to apply, which is most likely to cause the risk of wrinkling and peeling of the paint film.

五、足够的施工防护与完工后防护

5. Adequate Construction Protection and Post-completion Protection

无论是施工的过程中，还是施工完成之后的固化过程中，环氧地坪漆和施工操作人员，都是需要有足够的保护措施的。首先，要保护无锡环氧地坪施工人员的生命和健康安全，对于某些有风险的操作，要有足够的自我保护意识；其次，对于地坪项目，要保证它在投入使用之前，不因为外界原因造成不良，保护措施相当重要。

Whether in the process of construction or in the curing process after completion of construction, epoxy floor paint and construction operators need adequate protection measures. First of all, to protect the life and health of construction personnel, for some risky operations, we should have sufficient self-protection awareness; secondly, for the floor project, we should ensure that it is not harmful for external reasons before putting into use, and protection measures are very important.